Circular Hollow Section Weight Calculator

Circular Hollow Section Weight Formula:

\[ Weight = Density \times \pi \times Length \times (Radius^2 - Inner\ Radius^2) \]

Density (kg/m³):

kg/m³

Length (m):

Radius (m):

Inner Radius (m):

Weight:

Unit Converter ▲

Unit Converter ▼

From:	To:

1. What is Circular Hollow Section Weight Calculation?

The circular hollow section weight calculation determines the mass of a cylindrical tube based on its material density, length, outer radius, and inner radius. This is essential for engineering, construction, and material estimation purposes.

2. How Does the Calculator Work?

The calculator uses the circular hollow section weight formula:

\[ Weight = Density \times \pi \times Length \times (Radius^2 - Inner\ Radius^2) \]

Where:

\( Density \) — Material density (kg/m³)
\( \pi \) — Mathematical constant (approximately 3.14159)
\( Length \) — Length of the section (m)
\( Radius \) — Outer radius of the section (m)
\( Inner\ Radius \) — Inner radius of the section (m)

Explanation: The formula calculates the volume of material by finding the cross-sectional area (outer circle minus inner circle) and multiplying by length, then multiplies by density to get weight.

3. Importance of Weight Calculation

Details: Accurate weight calculation is crucial for structural design, material procurement, transportation planning, and cost estimation in construction and manufacturing projects.

4. Using the Calculator

Tips: Enter density in kg/m³, length in meters, radius in meters, and inner radius in meters. All values must be positive, and outer radius must be greater than inner radius.

5. Frequently Asked Questions (FAQ)

Q1: What materials can this calculator be used for?
A: This calculator works for any material - steel, aluminum, copper, plastic, etc. - as long as you know the material's density.

Q2: How do I find the density of my material?
A: Material density values are typically available in engineering handbooks, material specifications, or from material suppliers.

Q3: Can I use different units?
A: The calculator uses metric units (kg/m³ and meters). Convert other units to these before calculation.

Q4: What if I have diameter instead of radius?
A: Divide diameter by 2 to get radius. Ensure both outer and inner measurements are converted to radius values.

Q5: Is this calculation accurate for all hollow sections?
A: This calculation is accurate for perfect circular hollow sections with uniform wall thickness. It may not be accurate for irregular shapes or varying wall thickness.