Cng Cylinder Weight Calculator

CNG Cylinder Weight Formula:

\[ Weight = Tare\ Weight + (Pressure \times Volume / Compressibility) \times Density \]

Tare Weight (kg):

Pressure (Pa):

Volume (m³):

m³

Compressibility (unitless):

unitless

Density (kg/m³):

kg/m³

Weight (kg):

Unit Converter ▲

Unit Converter ▼

From:	To:

1. What is the CNG Cylinder Weight Calculation?

The CNG Cylinder Weight calculation determines the total weight of a compressed natural gas cylinder by accounting for the tare weight of the empty cylinder plus the weight of the compressed gas content, considering pressure, volume, compressibility, and density factors.

2. How Does the Calculator Work?

The calculator uses the CNG cylinder weight formula:

\[ Weight = Tare\ Weight + (Pressure \times Volume / Compressibility) \times Density \]

Where:

\( Tare\ Weight \) — Weight of the empty cylinder (kg)
\( Pressure \) — Gas pressure inside the cylinder (Pa)
\( Volume \) — Internal volume of the cylinder (m³)
\( Compressibility \) — Compressibility factor of the gas (unitless)
\( Density \) — Density of the gas (kg/m³)

Explanation: The formula calculates the mass of gas contained in the cylinder using the ideal gas law with compressibility correction, then adds the tare weight of the cylinder itself.

3. Importance of CNG Cylinder Weight Calculation

Details: Accurate weight calculation is crucial for safety compliance, transportation regulations, determining remaining gas content, and proper cylinder handling and storage procedures.

4. Using the Calculator

Tips: Enter all values in the specified units. Tare weight, pressure, volume, compressibility, and density must be positive values. Use appropriate compressibility factors for accurate results.

5. Frequently Asked Questions (FAQ)

Q1: What is the compressibility factor?
A: The compressibility factor (Z-factor) accounts for the deviation of real gases from ideal gas behavior. It varies with pressure and temperature.

Q2: Why is accurate weight calculation important?
A: Accurate weight calculation ensures safety compliance, prevents overfilling, helps in inventory management, and ensures proper vehicle loading for transportation.

Q3: How often should CNG cylinder weight be checked?
A: Weight should be checked before each filling, during routine inspections, and whenever the cylinder is handled or transported.

Q4: What are typical density values for CNG?
A: Natural gas density varies with composition but typically ranges from 0.7-0.9 kg/m³ at standard conditions. The density increases with pressure.

Q5: Are there safety considerations?
A: Yes, never exceed the maximum allowable working pressure (MAWP) of the cylinder. Regular inspections and proper handling are essential for safety.